Canon i475D i475D Direct Printing Guide - Page 37

Error Number/Problem 403 The print head is faulty. 611 A specified period of time has lapsed without receiving a response from the digital camera. 612 This printer is not ready for the connected digital camera or digital video camcorder. 802/804/806/807/808/809 An error requiring a service may have occurred. Try This Turn off the printer by pressing the Power button, then turn on the printer again. If the same error persists, the print head may be faulty. Contact a Canon service representative. Press the Resume button. The digital camera will automatically turn on. If not, turn it on. Disconnect the camera connection cable, press the Resume button, and then connect the cable once more. If the error is still unresolved, there is a possibility that you are using a digital camera or digital video camcorder that is not supported by this printer. Connect compatible digital cameras or digital video camcorders that are compatible with this printer. Turn off the printer, remove the power cord plug from the outlet, plug the power cord back in, and then turn on the printer again. If the same error persists, contact a Canon service representative. If the Same Error Persists If the same error persists after a countermeasure is taken according to the above error number, turn off the printer, remove the power cord plug from the outlet, plug the power cord back in, and then turn on the printer again. „ An Error Icon is Displayed on the Operation Panel. Error Icon/Problem stays lit. The memory card is inserted incorrectly. is flashing. The memory card cannot be read. The ? mark is displayed beside the ink tank icon. Try This Insert an available memory card after checking its orientation. See "Using a Memory Card" on page 6. If a memory card has already been inserted, remove it and then insert it again. Next, check that the Indicator lamp stays on. Never remove the card while image data is being read (the Indicator lamp is flashing). Image data edited/processed on the computer must also be printed from the computer. After replacing an ink tank with a new one, reset the relevant ink counter. See "Replacing an Ink Tank" on page 31. An ink counter has not been reset after replacement of the relevant ink tank. 36