Canon imageCLASS D1150 imageCLASS D1180/D1170/D1150/D1120 Basic Operation Guid - Page 144

Sending Fax Documents Sending Fax Documents This section describes the settings and procedures for sending fax documents. Basic Methods for Sending Faxes This section describes the flow of sending faxes. 1 Place documents. 2 Press [SEND/FAX]/ [FAX]. The SEND/FAX indicator lights up and the machine enters the send standby mode. 3 Press [SEND/FAX] repeatedly to select , then press [OK]. FAX SELECT:OK For the D1150, skip this step. 4 Use - , [numeric keys] and [Tone] to specify the fax number. Ex. FAX NUMBER TEL=012XXXXXXX If you enter a wrong number when specifying a fax number, go back to the wrong digit with . 5 Press [Start]. - When you place the documents on the platen glass, press or to select the document size, then press [Start] for each document. When scanning is complete, press [OK] to start sending. - You can also adjust the following scan settings as necessary, using the keys on the operation panel, after specifying the destination in step 4. • Density: See "Adjusting Density," on p. 6-29. • Image Quality: See "Selecting Image Quality," on p. 6-30. • 2-Sided: See "2-Sided Documents," on p. 6- 31. Calling the Recipient before Sending Fax Documents (Manual Sending) Use manual sending when you want to talk to the recipient before sending a document, or if the recipient does not have a fax machine that can receive automatically. - You cannot use the platen glass for manual sending. - You cannot use group addresses for manual sending. - You cannot use 2-Sided scanning mode for manual sending. Fax (D1180/D1170/D1150) 6-13