Canon imagePROGRAF iPF820 iPF820 User Manual - Page 103

Printing procedure Loading and Printing on Rolls These are the basic steps for loading and printing on rolls. Follow the steps below to switch to a new roll or a roll of a different type or width before printing. Note • The procedure varies depending on the ManageRemainRoll setting in the printer menu and whether or not a barcode has been printed on the loaded roll. (→P.136) • Steps 6 and 7 are unnecessary if ManageRemainRoll is On and a barcode has been printed on the roll. • Step 7 is unnecessary if ManageRemainRoll is Off. • If the Wheeled Output Stacker is installed, remove it in advance. (→P.159) • When Width Detection in the printer menu is Off, after you have selected the type of paper in step 6, you will need to enter the roll width. (→P.53) • For details on supported sizes and types of rolls, see "Paper Sizes" or the Paper Reference Guide. (→P.109) (→P.104) • If you prefer to wait for the ink to dry after printing and simply eject the document, you can deactivate automatic cutting and cut the paper manually. (→P.139) 1. Turn the printer on. (→P.25) 2. Select a roll as the paper source. (→P.112) Basic Printing Workow 89