Canon imagePROGRAF iPF820 iPF820 User Manual - Page 467

Network Setting Specifying Printer-Related Information Follow the steps below to specify device information and security settings. 1. Start the web browser and enter the following URL in the Location (or Address ) box to display the RemoteUI page. http://"printer IP address or name"/ Example: http://xxx.xxx.xxx.xxx/ 2. Select Administrator Mode and click Logon. 3. If a password has been set on the printer, enter the password. 4. Click Information in the Device Manager menu at left to display the Information page. 5. To display the relevant settings page, click Edit in the upper-right corner of Device Information or Security, depending on what information you want to specify. 6. Refer to the table of settings for device information, security, and email notication as you complete these settings. Device Information Settings Item Device Name Location Administrator Phone Comments(E-mail) Details Enter a device name. (0-32 characters) Default Setting blank Enter the location where the device is installed. blank (0-32 characters) Enter the administrator's name. (0-32 characters) blank Enter the administrator's contact information. (0-32 characters) blank Enter any comments regarding the administrator. blank (0-32 characters) Security Settings Item Old Password Details Enter the current device password. (0-14 characters) Default Setting blank New Password Enter the new password. (0-14 characters) blank Conrm Enter the new password again to conrm it. (0-14 characters) blank Besides entering a password, you can specify other security-related information, such as IP address-based SNMP or TCP usage restrictions, MAC address-based access restrictions, or IPP and FTP authentication settings. 7. Click OK to activate the settings. Network Setting 453