Canon imagePROGRAF iPF820 iPF820 User Manual - Page 77
System Setup, Keep Paper Size
View all Canon imagePROGRAF iPF820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Control Panel System Setup Setting Item Warning Buzzer Detect Mismatch Keep Paper Size Description, Instructions Set the buzzer. Choose On for the buzzer to sound once for warnings and three times for errors. Choose Warning for notication (display of a warning message) during printing if the type of paper specied in the printer menu does not match the type in the printer driver. Choose None to continue to print without notication. Choose Pause to have printing paused under these circumstances. In this case, you can continue printing by pressing the Online button. Choose On to use the paper size setting as the basis for printing instead of other settings. The margin setting of the printer menu will be used instead of the margin setting of the printer driver if the latter is smaller, which may prevent text or images in the margin from being printed. Choose Off to use the printer driver settings instead. Even if the margin setting of the printer driver is smaller than that of the printer menu, text or images will not be cut off. However, this requires longer paper because the actual margin will be equal to the margin setting of the printer driver plus the margin setting of the printer menu. Paper Size Basis Sht Selection 1 Sht Selection 2 Roll Switching Use Optimal Size No RollSwitching TrimEdge Reload If sheet size detection is activated, choose whether ISO A3+ or 13"x19"(Super B) is applied when an intermediate size is detected. If sheet size detection is activated, choose whether ISO B1 or 28"x40" (ANSI F) is applied when an intermediate size is detected. Selects the optimal paper size to minimize the amount of paper wasted. Prints using the roll currently advanced on the Platen. Specify whether to trim the leading edge of the currently retracted roll when the roll is advanced. Cut the edge if you are concerned about any marks left on the roll when the roll is left in the retracted position. Selecting On will always trim the edge when the roll is advanced from the retracted position. Selecting Automatic will trim the edge when the roll has been in the retracted position for two days or more. Printer Parts 63