Canon imagePROGRAF iPF820 iPF820 User Manual - Page 669

Messages regarding paper Roll x is empty. (x is 1 (Upper) or 2 (Lower)) Lift the release lever and replace the roll. Cause Corrective Action The roll is empty. Follow these steps to replace the used roll with a new roll of the same type and size. 1.Lift the Release Lever and remove the roll. (→P.125) (→P.129) 2.Load the new roll. (→P.115) (→P.118) 3.If no barcode was printed on the roll, specify the type of paper. (→P.113) 4.If no barcode was printed on the roll, specify the paper length. (→P.114) 5.If Not nished printing. Finish printing remaining jobs? is shown on the Display Screen, press the OK button. Printing will resume, starting from the page on which the error occurred. There is remaining roll paper, but because it could not be advanced, it could not be detected. Choose a higher level of Print Quality in the Advanced Settings of the printer driver and try printing again. (→P.211) Press OK. The roll is empty. Cause Corrective Action Follow these steps to replace the used roll with a new roll of the same type and size. 1.Press the OK button and remove the roll. (→P.125) (→P.129) 2.Load the new roll. (→P.115) (→P.118) 3.If no barcode was printed on the roll, specify the type of paper. (→P.113) 4.If no barcode was printed on the roll, specify the paper length. (→P.114) 5.If Not nished printing. Finish printing remaining jobs? is shown on the Display Screen, press the OK button. Printing will resume, starting from the page on which the error occurred. Error Message 655