Canon imagePROGRAF iPF820 iPF820 User Manual - Page 674

Messages regarding paper Borderless printng not possible. Lift release lever and reload the paper. Cause Corrective Action Because paper expands or contracts depending on Hold down the Stop button for a second or more to the environment of use, it may become narrower or cancel printing. wider than the supported width for borderless printing. Use each type of paper only where the recommended environmental conditions are met. For details on environmental conditions for various paper, see the Paper Reference Guide. (→P.104) The paper is loaded askew. Lift the Release Lever and straighten the paper so that the edge of the paper is in the width of the ink groove for borderless printing. Insert the roll rmly until it touches the ange of the Roll Holder. (→P.115) If you press the Online button and continue printing, the document will be printed with a border. Check supported paper. Cause Corrective Action The print job received species a type or width of paper that is not compatible with borderless printing. Follow these steps to change the settings of the print job to enable borderless printing. 1.Hold down the Stop button for a second or more to cancel printing. 2.Make sure the correct printer driver for the printer is selected and try printing again. For information on types of paper compatible with borderless printing, refer to the Paper Reference Guide. (→P.104) If you press the Online button and continue printing, the document will be printed with a border. The loaded paper is not compatible with borderless Hold down the Stop button for a second or more to printing. cancel printing. If you press the Online button and continue printing, the document will be printed with a border. Roll feed unit error. Cause There is a problem with the Roll Unit. Corrective Action Turn off the printer and wait at least three seconds before restoring the power. If the message is displayed again, contact your Canon dealer for assistance. 660 Error Message