Canon imagePROGRAF iPF820 iPF820 User Manual - Page 127
Selecting the Paper Type (Roll), MAIN MENU, Roll1Uppr Type, Online
View all Canon imagePROGRAF iPF820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
Handling rolls Selecting the Paper Type (Roll) When changing the type of paper after the paper has been advanced, specify the type of paper as follows. Important • For best printing results, the printer ne-tunes the feed amount for each type of paper. Be sure to select the type of paper to use correctly before printing. • Because the printer ne-tunes the feed amount for each type of paper, the margins and the size of printed images may vary depending on the type of paper used. If margins and the size of images are not as you expected, adjust the paper feed amount and Printhead height. (→P.552) (→P.551) Note • After you load the roll, the printer automatically shows a menu for selection of the paper type on the Display Screen, unless a barcode has been printed on the roll or you have activated automatic monitoring of the remaining roll paper. Select the type of paper, and then press the OK button. If no barcode has been printed on the roll and you have activated automatic monitoring of the remaining roll paper, specify the roll length after the paper type. (→P.114) 1. Press the Menu button to display MAIN MENU. 2. Press ▲ or ▼ to select Media Menu, and then press the ► button. 3. Press ▲ or ▼ to select Roll1(Uppr) Type or Roll2 (Lwr) Type, and then press the ► button. 4. Press ▲ or ▼ to select the type of paper loaded in the printer, and then press the OK button. Note • For details on types of paper, see the Paper Reference Guide. (→P.104) By default, Plain Paper is selected. • If you move the Release Lever, the setting automatically reverts to the previously selected paper. • Be sure to select the correct paper type. If this setting does not match the loaded paper, it may cause feed errors and affect printing quality. • If automatic monitoring of the remaining roll is deactivated ( Off is selected) and you have selected a type of paper for which width detection is deactivated ( Off is selected), you must advance the paper manually to the position for printing. (→P.153) 5. Press the Online button to bring the printer online. Handling Paper 113