Canon imagePROGRAF iPF820 iPF820 User Manual - Page 667

Messages regarding paper Insufcient paper for job Cause Corrective Action The printer has received a print job longer than the Press the Online button to resume printing. amount of roll paper left when ManageRemainRoll However, the roll paper may run out during the in the printer menu is On and one of the following print job and you may not be able to print all of the settings is selected. document. • An option other than Roll Paper (Auto) is selected Hold down the Stop button for a second or more to in Paper Source in the printer driver. cancel printing. • During HP-GL/2 printing, GL2 Settings > Paper Either change the printer driver Paper Source setting Source in the printer menu is set to an option or the GL2 Settings > Paper Source setting in the other than Automatic. printer menu or replace the roll with a roll that has enough paper for the print job, and then try printing again. (→P.125) (→P.118) This paper cannot be used. Cause Corrective Action Paper that is too large for the printer has been loaded. Lift the Release Lever and load paper of the correct size. (→P.109) Paper that is too small for the printer has been loaded. Lift the Release Lever and load paper of the correct size. (→P.109) Paper has been loaded that is too small to print the test pattern for printhead adjustment or nozzle checking. Lift the Release Lever and load unused paper A4 or larger. More than one sheet may be required depending on the adjustment. Cannot print as selected. Another roll is in use. Cause A printed document remains in the Output Tray without being cut and a print job was received that species the other roll. Corrective Action Follow these steps to load the other roll after cutting the printed document. 1.Hold down the Stop button for a second or more to cancel printing. 2.Cut the printed document. (→P.139) 3.Load the other roll and resend the print job. (→P.89) Error Message 653