Canon imagePROGRAF iPF820 iPF820 User Manual - Page 73

Setting Item Smoothing Description, Instructions • If you choose Smooth Control Panel Line Width Choose the width for printing lines if no width is specied in the data. Dots in the line width are 300 dpi each. ThickenFineLines Select On to print ne lines more distinctly. AdjustFaintLines If ne lines are printed in colors that do not match the colors of other shapes, selecting Off may help produce the expected results. However, lines in some colors may appear broken. Auto Rotate If the long side of an original is shorter than the roll width, the original is automatically rotated 90 degrees to conserve paper. Similarly, if the long side of an original in landscape orientation is longer than the roll width and the short side is shorter than the roll width, the original is repositioned to t on the paper. HP RTL print jobs are not rotated.(*2) Nesting Use Nesting Selecting On will store print jobs until multiple documents can be arranged to ll up the roll width, instead of printing each print job as it is received. Nesting WaitTime Specify a time to wait until printing, as desired. Cut Lines Select On to print cut lines between each document on the roll. On-the-Fly Selecting On will start printing jobs sooner if you are printing only HP RTL print jobs and printing would not start until later. However, images may be omitted in some cases, so be sure to check the printing results. *1: It is not possible to match the colors and image quality produced by the specied printer exactly. *2: Because HP RTL images are not rotated even if the paper is rotated 90 degrees, images may be cut off or the blank paper may be ejected. In this case, set Auto Rotate to Off. Printer Parts 59