Canon imagePROGRAF iPF850 MFP M40 User Guide - Page 456
DNS Dync update, Pri. DNS SrvAddr
View all Canon imagePROGRAF iPF850 MFP M40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 456 highlights
Menu Settings GL2 Settings Line & Pen Manager Setting Item Smoothing Description, Instructions • If you choose Smooth iPF850 ThickenFineLines Select On to print fine lines more distinctly. AdjustFaintLines If fine lines are printed in colors that do not match the colors of other shapes, selecting Off may help produce the expected results. However, lines in some colors may appear broken. Control Panel Ln wdth correct Corrects by using a correction value that specifies the pen width. You can configure Black/gray and Color for each group. The specified range is -20 to +20. ProcessingOption Warning On-the-Fly Select On to have any GL2-related warnings displayed. Selecting On will start printing jobs sooner if you are printing only HP RTL print jobs and printing would not start until later. However, images may be incomplete in some cases, so be sure to check the printing results. Printer Menu Detect img size Sets the method of deciding the region to output in order to print efficiently while avoiding missing images. If Off is selected and the data contains image range information, the image range information is followed. If Off is selected and the data does not contain image range information, a size with the maximum roll paper width of the printer for the width and 1.5 times the maximum roll paper width for the length is used. If Command priority is selected and the data contains image range information, the image range information is followed. If Command priority is selected and the data does not contain image range information, the detected minimum image area is used. If Detected size is selected, the detected minimum image area is used. GL2 Set Print Print GL2 settings information. Interface Setup EOP Timer TCP/IP IPv4 IPv4 Mode Specify the timeout period before cancellation of print jobs that cannot be received by the printer. Choose whether the printer IP address is configured automatically or a static IP address is entered manually. Protocol DHCP BOOTP Specify the protocol used to configure the IP address automatically. RARP IPv4 IP Address Specify the printer network information when using a stat- 456 Settings Subnet Mask Default G/W ic IP address. Enter the IP address assigned to the printer, as well as the network subnet mask and default gateway. The value that was automatically configured is displayed if you have set IPv4 Mode to Automatic. DNS DNS Dync update Settings Specify whether DNS server registration is updated automatically. Pri. DNS SrvAddr Specify the DNS server address. Sec. DNS SrvAddr User's Guide