Canon imagePROGRAF iPF850 MFP M40 User Guide - Page 657
This paper cannot be used as size is not supported., Cannot print as selected. Another roll is in use.
View all Canon imagePROGRAF iPF850 MFP M40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 657 highlights
iPF850 This paper cannot be used as size is not supported. This paper cannot be used as size is not supported. Cause Paper that is too large for the printer has been loaded. Paper that is too small for the printer has been loaded. Paper has been loaded that is too small to print the test pattern for printhead adjustment or nozzle checking. Corrective Action Lift the Release Lever and load paper of the correct size. (See "Paper Sizes.") ➔P.332 Lift the Release Lever and load paper of the correct size. (See "Paper Sizes.") ➔P.332 Lift the Release Lever and load unused paper A4/Letter (vertical) or larger. More than one sheet may be required depending on the adjustment. Cannot print as selected. Another roll is in use. Cause A printed document remains in the Output Tray without being cut and a print job was received that specifies the other roll. Corrective Action Press the OK button to stop printing. Cut the printed document. (See "Specifying the Cutting Method for Rolls.") ➔P.360 Load the other roll and resend the print job. (See "Loading and Printing on Rolls.") ➔P.18 Roll printing is selected. Cause You have attempted to print on a roll, but no roll is loaded. Corrective Action Press ▲ or ▼ to select "Load Roll Paper", and then press the OK button. Load the roll, and then print. (See "Attaching the Roll Holder to Rolls.") ➔P.342 (See "Loading Rolls in the Printer.") ➔P.345 Press ▲ or ▼ and select Stop Printing or press the Stop button to stop printing. Roll printing is selected, but sheets are loaded. Cause A print job for rolls was received when a sheet is loaded. Corrective Action Follow these steps to load and print on a roll. 1. Press ▲ or ▼ to select Eject Cut Sheet, press the OK button, and remove the sheet. (See "Removing Sheets.") ➔P.373 2. Load a new roll. (See "Loading Rolls in the Printer.") ➔P.345 The printer now starts printing the print job. Press ▲ or ▼ to select Stop Printing, and then press the OK button. Roll x is selected. (x is 1 (Upper) or 2 (Lower)) Cause The indicated roll is specified for a print job sent from a computer, but that roll is not loaded. Corrective Action Press ▲ or ▼ to select "Load Roll Paper", and then press the OK button. Load the roll, and then print. (See "Attaching the Roll Holder to Rolls.") ➔P.342 (See "Loading Rolls in the Printer.") ➔P.345 Press ▲ or ▼ and select Stop Printing or press the Stop button to stop printing. Error Message Messages regarding paper 657 User's Guide