Canon imagePROGRAF iPF850 MFP M40 User Guide - Page 90

Enhanced Printing Options Borderless Printing at Actual Size (Mac OS) 14 Confirm the print settings and print as desired. • For tips on confirming print settings, see "Confirming Print Settings ." ➔P.161 Note iPF850 Borderless Printing at Actual Size (Mac OS) This topic describes how to print borderlessly at actual size based on the following example. • When borderless printing is used, the edge of the paper is cut during printing. Thus, ink density may be uneven at Important the edges. If you require higher image quality, select No from the Automatic Cutting list in the Paper Detailed Settings dialog box. In this case, the paper can be printed without borders on the left and right sides only. Once printed and cut, please cut the upper and lower bands with scissors. • Document: Any type • Page size: 10 × 12 inches (254.0×304.8 mm)-Borderless • Paper: Roll • Paper type: Canon Glossy Photo Paper 170gsm • Roll paper width: 10 inches (254.0 mm) 1 Choose Page Setup from the application menu to display the Page Attributes dialog box. Printing at full size • Page Setup might not be displayed in the menu de- Note pending on the OS you are using and the application software. In this case, select Print from the menu in the appli- cation software, and configure the settings in the up- per part of the printer driver screen that is displayed. 2 Select the printer in the B Format for list. 3 In the C Paper Size list, choose a paper size supported for borderless printing. Here, click 10"x12" - Bor- derless. • Paper sizes supported for borderless printing are indicated by -Borderless. Note 90 4 Click F OK to close the dialog box. 5 In the application, create an original that takes up the entire space of the paper size. 6 Choose Print in the application menu. User's Guide