Canon imagePROGRAF iPF850 MFP M40 User Guide - Page 628
Roll paper cannot be inserted into the Paper Feed Slot, Cannot load sheets, Paper is not cut neatly
View all Canon imagePROGRAF iPF850 MFP M40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 628 highlights
Roll paper cannot be inserted into the Paper Feed Slot 8 In a crouching position, push the Roll Unit in. iPF850 9 Turn the printer on. (See "Turning the Printer On and Off.") ➔P.17 Roll paper cannot be inserted into the Paper Feed Slot Cause The roll paper is warped. Paper is jammed by the paper feed slot. The paper source selection is incorrect. If paper cannot be advanced from Roll 2 (Lower), the Roll Unit Cable is disconnected. Corrective Action Straighten out curls and reload the roll. Remove the jammed paper. (See "Clearing Jammed Roll Paper.") ➔P.619 (See "Clearing a Jammed Sheet.") ➔P.622 Press the Load button and select the paper source. Connect the Roll Unit Cable firmly to the Roll Unit Power Supply Inlet and the inlet on the roll unit. Troubleshooting Cannot load sheets Cause Corrective Action The paper source selection is incorrect. Press the Load button and select the paper source. Problems Regarding Paper Paper is not cut neatly Cause The paper is bent or curled at the cut position. Paper rises by the ends of the cut position before it is cut. You are using paper that cannot be cut with the Cutter Unit. Cut Speed is not configured correctly in the Control Panel menu. During cutting, printed documents fall out at an angle. Corrective Action Straighten out any curling by the edges of the paper. Reload the paper correctly. Specify Manual in Cutting Mode in the Control Panel menu and use scissors or a cutting tool to cut the roll after printing. (See "Specifying the Cutting Method for Rolls.") ➔P.360 Change the Cut Speed setting in the Control Panel menu. (See "Menu Structure.") ➔P.443 In the Control Panel menu, set Cutting Mode to Eject. Hold documents after printing, as they are cut. (See "Specifying the Cutting Method for Rolls.") ➔P.360 Paper is not cut Cause Corrective Action 628 In the printer driver, No or Print Cut Guideline is specified in Specify Yes in Automatic Cutting in the printer driver. Automatic Cutting. (See "Page Setup Sheet (Windows).") ➔P.177 (See "Paper Detailed Settings Dialog Box (Mac OS).") ➔P.276 In the Control Panel menu, Cutting Mode is set to Eject or Manual. If the Cutting Mode is Eject, press the Cut button to cut the paper. If the Cutting Mode is Manual, cut rolls with scissors or the like. (See "Specifying the Cutting Method for Rolls.") ➔P.360 User's Guide