Canon imagePROGRAF iPF850 MFP M40 User Guide - Page 80

Resizing Originals by Entering a Scaling Value (Mac OS) 6 Click the Page Setup tab to display the Page Setup sheet. iPF850 Enhanced Printing Options Printing enlargements or reductions 7 Select and click a roll paper in the L Paper Source list. 8 Select the width of the loaded roll in the M Roll Paper Width list-in this case, ISO A2/A3 Roll (420.0mm). 9 In the A Page Size list, click the size of the original as specified in the application. In this case, click ISO A4. 10 Select the C Enlarged/Reduced Printing check box. 11 Click ISO A4 in the G Paper Size list. 12 Click F Scaling and enter 120. • You can specify enlargement that exceeds the paper size, but in this case, the portions off the bottom and Note right edges of the paper will not be printed. • If the original size after enlargement or reduction is smaller than the paper size, the original is printed in the upper-left corner. In this case, you can center originals by selecting E Print Centered on the Lay- out sheet. 13 Confirm the print settings and print as desired. 80 • For tips on confirming print settings, see "Confirming Print Settings ." ➔P.161 Note Resizing Originals by Entering a Scaling Value (Mac OS) This topic describes how to enlarge originals before printing by entering a scaling value, based on the following example. User's Guide