Canon imagePROGRAF iPF850 MFP M40 User Guide - Page 490
Configuring the Printer's TCP/IP Network Settings With RemoteUI, Location, Address
View all Canon imagePROGRAF iPF850 MFP M40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 490 highlights
Configuring the Printer's TCP/IP Network Settings With RemoteUI iPF850 • If you switch to printing in a TCP/IP network, or if the printer's IP address is changed, see "Configuring the Destination in TCP/IP Networks ." ➔P.493 • If you switch to printing in a Bonjour network, see "Configuring the Destination for Bonjour Network ." ➔P.493 Configuring the Printer's TCP/IP Network Settings With RemoteUI Follow the steps below to configure the TCP/IP network settings. When using an IPv4 IP address 1 Start the web browser and enter the following URL in the Location (or Address ) box to display the RemoteUI page. http://printer IP address or name/ Example: http://xxx.xxx.xxx.xxx/ 2 Select Administrator Mode and click Logon. • If a password has been set on the printer, enter the password. Note Network Setting 3 Click Network in the Device Manager menu at left to display the Network page. 4 Click Edit in the upper-right corner of the TCP/IPv4 group to display the Edit TCP/IP Protocol Settings page. Initial Settings 5 Refer to the TCP/IP Settings Items table to complete the settings. TCP/IP Settings Items Item Details Default Setting Use DHCP Activate this setting to use DHCP for configuring the IP address. Off Use BOOTP Activate this setting to use BOOTP for configuring the IP address. Off Use RARP Activate this setting to use RARP for configuring the IP address. Off Enable DNS Dynamic Activate this setting to perform DNS server registration automatically. Off Update Use Zeroconf Func- Activate this setting to use Bonjour. On tion IP Address Specify the printer's IP address. 0.0.0.0 Subnet Mask Specify the printer's subnet mask. 0.0.0.0 Gateway Address Specify the printer's default gateway. 0.0.0.0 LPD Printing Activate this setting to use LDP Printing. On IPP Printing Activate this setting to use IPP Printing. On IPP Printer URI Specify the URI of the printer used for IPP printing using up to 252 charac- printer ters. RAW Printing Activate this setting to use Raw Printing. On RAW Mode Bi-direc- Activate this setting to use Raw mode bidirectional communication. Off tion FTP Printing Activate this setting to use FTP Printing. On 490 Use Discovery Scope Activate this setting to use SLP Discovery function. Enter the SLP search range. On default SMTP Server Address Specify the SMTP server's IP address. You can also specify the SMTP server domain name, if desired. 0.0.0.0 Primary DNS Server Specify the IP address of the primary DNS server. Address 0.0.0.0 Secondary DNS Server Address Specify the IP address of the secondary DNS server. 0.0.0.0 User's Guide