Chamberlain B2210T Installation Manual - English Spanish - Page 23
STEP 9 Connect the Door Arm to the Trolley continued
View all Chamberlain B2210T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Installation STEP 9 Connect the Door Arm to the Trolley (continued) OPTION B- ONE-PIECE DOORS IMPORTANT: The groove on the straight door arm MUST face away from the curved door arm. 1. Close the door. Disconnect the trolley by pulling the emergency release handle. 2. Fasten the straight door armand the curved door arm together to the longest possible length (with a 2 or 3 hole overlap) using the bolts, nuts, and lock washers. 3. Attach the straight door arm to the door bracket using the clevis pin. Secure with the ring fastener. 4. Attach the curved door arm to the trolley using the clevis pin. Secure with the ring fastener. 5. Pull the emergency release handle to ward the garage door opener until the trolley release arm is horizontal. HARDWARE Clevis Pin 5/16"x1-1/4" Ring Fastener Clevis Pin 5/16"x1" Lock Washer 5/16" -18 Hex Bolt 5/16"-18x7/8" Nut 5/16"-18 23 Straight Door Arm (Groove facing out) Curved Door Arm One-Piece Door without Track Ring Fastener Ring Fastener Nut Lock Washer Clevis Pin 5/16"x1-1/4" Hex Bolts One-Piece Door with Track Ring Fastener Ring Fastener Nut Lock Washer Clevis Pin 5/16"x1-1/4" Hex Bolts Clevis Pin 5/16"x1" Clevis Pin 5/16"x1"