Chamberlain B2210T Installation Manual - English Spanish - Page 39
Using your Garage Door Opener, Using your Door Control
View all Chamberlain B2210T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Operation Using your Door Control MOTION DETECTING CONTROL PANEL Push Bar LOCK: Prevents remote controls from working, while still allowing activation from the door control and keyless entry. (Factory setting is OFF.) Turn ON: Press and hold the LOCK button for 2 seconds. The command LED will flash as long as the lock feature is on. Turn OFF: Press and hold the LOCK button for 2 seconds. The command LED will stop flashing and normal operation will resume. Motion Sensor Switch LEARN Button LOCK Button Command LED LIGHT Button Motion Sensor SYNCHRONIZE THE DOOR CONTROL: To synchronize the door control to the garage door opener, press the push bar until the garage door opener activates (it may take up to 3 presses). Test the door control by pressing the push bar; each press of the push bar will activate the garage door opener. PUSH BAR: Press the push bar to open or close the door. LEARN BUTTON: Use to program compatible remote controls, wireless keyless entries and myQ® devices to the garage door opener. MOTION SENSOR: Turns the garage door opener lights on when motion is detected. Lights stay on for 4-1/2 minutes (factory setting), then turn off. Set the motion sensor switch ON or OFF to control this feature. 39