Cisco 3825 Software Configuration Guide - Page 123
BSC/RNC Configuration, hostname - login
UPC - 746320981505
View all Cisco 3825 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Chapter 4 Configuring the Cisco 3825 Mobile Wireless Edge Router in a RAN-O Solution with the Command-Line Saving Configuration Changes disable-eadi ! ! control-plane ! line con 0 logging synchronous line aux 0 line vty 04 login password !--- Set VTY password ! ntp server W.X.Y.Z !--- Set W.X.Y.Z to the NTP server on the network. This is important so !that all the MWTM reports sync with the correct time. MWTM should sync to the same NTP !server. BSC/RNC Configuration ! version 12.4 service timestamps debug datetime msec localtime service timestamps log datetime msec localtime no service password-encryption ! hostname hostname !--- Enter here ! boot-start-marker boot system flash slot0: !--- Image Name boot-end-marker ! card type e1 0 0 card type e1 0 1 card type e1 0 2 logging buffered 1000000 debugging enable password !--- Set the ENABLE password here ! no aaa new-model ! resource manager ! clock timezone EST -5 !--- Example of setting time zone ! redundancy mode y-cable standalone ! network-clock-participate wic 0 network-clock-participate wic 1 network-clock-participate wic 2 network-clock-participate aim 1 network-clock-select 1 E1 0/0/0 network-clock-select 2 E1 0/0/1 network-clock-select 3 E1 0/1/1 network-clock-select 4 E1 0/2/0 mmi polling-interval 60 no mmi auto-configure no mmi pvc mmi snmp-timeout 180 ip subnet-zero no ip dhcp use vrf connected ! ! OL-15667-03 Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide 4-65