Cisco 3825 Software Configuration Guide - Page 197

Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference pseudowire-class pseudowire-class To specify the name of a Layer 2 pseudowire-class and enter pseudowire-class configuration mode, use the pseudowire-class command in the global configuration mode. pseudowire-class [pw-class-name] Syntax Description pw-class-name (Required) The name of a Layer 2 pseudowire-class. Defaults No pseudowire-class is defined. Command Modes Global configuration Command History Release 12.0(23)S 12.3(2)T 12.4(12)MR2 Modification This command was introduced. This command was integrated into Cisco IOS Release 12.3(2)T. This command was integrated into Cisco IOS Release 12.4(12)MR2. Usage Guidelines The pseudowire-class command configures a pseudowire-class template that consists of configuration settings used by all attachment circuits bound to the class. A pseudowire-class includes the following configuration settings: • Data encapsulation type • Control protocol • Sequencing • IP address of the local Layer 2 interface • Type of service (ToS) value in IP headers After entering the pseudowire-class command, the router switches to pseudowire-class configuration mode where PW settings can be configured. Examples The following example shows how to enter pseudowire-class configuration mode to configure a PW configuration template named "ether-pw": Router# config t Router(config)# pseudowire-class l2tp Router(config-pw-class)# encapsulation l2tpv3 Router(config-pw-class)# exit Router(config)# exit OL-15667-03 Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide A-65