Cisco 3825 Software Configuration Guide - Page 221

Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference show ip rtp header-compression show ip rtp header-compression To show Real-Time Transport Protocol (RTP) header compression statistics, use the show ip rtp header-compression privileged EXEC command. show ip rtp header-compression [type number] [detail] Syntax Description type number detail (Optional) Interface type and number. (Optional) Displays details of each connection. Note This keyword is not supported on the Cisco 3825 router. Command Modes Privileged EXEC Command History Release 11.3 12.1(5)T 12.2(8)MC2 12.2(15)MC1 12.3(11)T 12.4(2)MR Modification This command was introduced. The command output was modified to include information related to the Distributed Compressed Real-Time Transport Protocol (dCRTP) feature. This command was incorporated. This command was incorporated. This command was incorporated. This command was incorporated. Usage Guidelines The detail keyword is not available with the show ip rtp header-compression command on a Route Switch Processor (RSP). However, the detail keyword is available with the show ip rtp header-compression command on a Versatile Interface Processor (VIP). Enter the show ip rtp header-compression type number detail command on a VIP to retrieve detailed information about RTP header compression on a specific interface. Examples The following is sample output from the show ip rtp header-compression command: Router# show ip rtp header-compression RTP/UDP/IP header compression statistics: Interface Multilink1 (compression off, IETF, RTP) Rcvd: 0 total, 0 compressed, 0 errors 0 dropped, 0 buffer copies, 0 buffer failures Sent: 430 total 429 compressed 15122 bytes saved, 0 bytes sent 0 efficiency improvement factor Connect: 16 rx slots, 16 tx slots, 0 long searches, 1 misses 99% hit ratio, five minute miss rate 0 misses/sec, 0 max. OL-15667-03 Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide A-89