Cisco 5508 Installation Guide - Page 23

Unpacking and Installing the Controller The bootup script displays operating system software initialization (code download and POST verification) and basic configuration as shown in the following sample bootup display: WLCNG Boot Loader Version 0.14.0 (Built on Dec 22 2008 at 11:54:51 by cisco) Board Revision 1.2 (SN: FCW1303L04E, Type: AIR-CT5508-K9) (G) Verifying boot loader integrity... OK. . . . IDE device 0: - Model: VI DFC1024MB Firm: 20071116 Ser#: DFC1GB - Type: Removable Hard Disk - Capacity: 967.6 MB = 0.9 GB (1981728 x 512) 00000E52 Press now to access the Boot Menu... Step 4 If desired, press Esc to display the Bootloader Boot Options menu. Boot Options Please choose an option from below: 1. Run primary image 2. Run backup image 3. Change active boot image 4. Clear Configuration 5. Format FLASH Drive 6. Manually update images Please enter your choice: Note Enter 1 to run the current software, enter 2 to run the previous software, or enter 4 to run the current software and set the controller configuration to factory defaults. Do not choose the other options unless directed to do so. Only options 1 through 3 are available in FIPS mode. Step 5 The rest of the process takes two to three minutes. Do not reboot the controller until the user login prompt appears. Detecting Hardware . . . Cryptographic library self-test....passed! . . . Cisco is a trademark of Cisco Systems, Inc. Software Copyright Cisco Systems, Inc. All rights reserved. Cisco AireOS Version 6.0.100.1 Initializing OS Services: ok . . . Starting SSHPM LSC PROV LIST: ok Starting Management Services: Web Server: ok CLI: ok Secure Web: ok License Agent: ok 78-18998-01 Cisco 5500 Series Wireless Controller Installation Guide 23