Cisco 7940 Administration Guide - Page 63
Device > Phone > Phone, Configuration, System > Enterprise, Parameters - video
UPC - 746320773858
View all Cisco 7940 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Chapter 4 Configuring Network Settings on the Cisco Unified IP Phone Network Configuration Menu Table 4-2 Network Configuration Menu Options (continued) Option Description To Change GARP Enabled Indicates whether the phone learns MAC addresses from Gratuitous Address Resolution Protocol (ARP) responses. Disabling the phone's ability to accept Gratuitous ARP will prevent applications that use this mechanism to monitor and record voice streams from working. If voice monitoring is not desired, set this option to No (disabled). From Cisco Unified Communications Manager, choose Device > Phone > Phone Configuration. Voice VLAN Enabled Indicates whether the phone allows a device attached to the PC port to access the Voice VLAN. Setting this option to No (disabled) prevents the attached PC from sending and receiving data on the Voice VLAN. This setting also prevents the PC from receiving data sent and received by the phone. Set this setting to Yes (enabled) if an application that requires monitoring of the phone's traffic is running on the PC. These applications include monitoring and recording applications and network monitoring software. From Cisco Unified Communications Manager, choose Device > Phone > Phone Configuration. Auto Line Select Enabled Indicates whether the phone shifts the call focus to incoming calls on all lines. When this option is set to No (disabled), the phone will only shift the call focus to incoming calls on the line that is in use. When this option is set to Yes, the phone will shift the call focus to the line with the most recent incoming call. From Cisco Unified Communications Manager, choose Device > Phone > Phone Configuration. Video Capacity Enabled Indicates whether the phone can participate in video calls From Cisco Unified Communications when connected to an appropriately equipped PC. Manager, choose Device > Phone > Phone Configuration. DSCP for Cisco Differentiated Services Code Point (DSCP) IP classification From Cisco Unified Communications CallManager to for call control signalling. Manager, choose System > Enterprise Device Interface Parameters. DSCP For Phone DSCP IP classification for any phone configuration transfer. From Cisco Unified Communications Configuration Manager, choose System > Enterprise Parameters. DSCP For Phone-Based Services DSCP IP classification for phone-based services. From Cisco Unified Communications Manager, choose System > Enterprise Parameters. Security Mode Displays the security mode that is set for the phone. From Cisco Unified Communications Manager, choose Device > Phone > Phone Configuration. Web Access Enabled Indicates whether the phone's internal web server is enabled From Cisco Unified Communications (Yes) or disabled (No). When disabled, you cannot access a Manager, choose Device > Phone > Phone phone's web pages. Configuration. OL-15498-01 Cisco Unified IP Phone 7960G/7940G Administration Guide for Cisco Unified Communications Manager 7.0 (SCCP) 4-9