Cisco 7942G Phone Guide - Page 13
Cisco 7942G - Unified IP Phone VoIP Manual
UPC - 882658140495
View all Cisco 7942G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Connecting Your Phone Adjusting the Footstand To change the angle of the phone base, adjust the footstand while pressing the footstand button. Adjusting the Handset Rest Cisco recommends adjusting the handset rest, particularly when wall mounting the phone, as this will ensure that the receiver will not readily slip out of the cradle. See the table below for instructions. 1 2 3 1 2 3 Set the handset aside and pull the square plastic tab from the handset rest. Rotate the tab 180 degrees. Slide the tab back into the handset rest. An extension protrudes from the top of the rotated tab. Return the handset to the handset rest. Registering with TAPS After your phone is connected to the network, your system administrator might ask you to auto-register your phone using TAPS (Tool for Auto-Registered Phones Support). TAPS might be used for a new phone or to replace an existing phone. To register with TAPS, pick up the handset, enter the TAPS extension provided by your system administrator, and follow the voice prompts. You might need to enter your entire extension, including the area code. After your phone displays a confirmation message, hang up. The phone will re-start. Using a Headset You can use a wired headset, or you can use a wireless headset in conjunction with the wireless headset remote hookswitch control feature. Headset Support Although Cisco Systems performs limited internal testing of third-party headsets for use with the Cisco Unified IP Phones, Cisco does not certify or support products from headset (or handset) vendors. Cisco Unified IP Phone 7962G and 7942G Phone Guide for Cisco Unified Communications Manager 7.1(2) (SCCP and SIP) 120521