Cisco CP-7961G Administration Guide - Page 100
Device > Phone > Phone, Configuration, > User, Preferences > Audio Preferences >
View all Cisco CP-7961G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Device Configuration Menu Chapter 4 Configuring Settings on the Cisco Unified IP Phone Table 4-15 Media Configuration Menu Options (continued) Option Description To Change Recording Tone Local Indicates the loudness setting for the beep tone From Cisco Unified Communications Manager Volume that is received by the party whose phone has the Administration, choose Device > Phone > Phone Recording Tone option enabled. Configuration. This setting applies for each listening device (handset, speakerphone, headset). Range: 0 percent (no tone) to 100 percent (same level as current volume setting on the phone). Default: 100 See also: Recording Tone Recording Tone Remote Volume Indicates the loudness setting for the beep tone that the remote party receives. The remote party is the party who is on a call with the party whose phone has the Recording Tone option enabled. From Cisco Unified Communications Manager Administration, choose Device > Phone > Phone Configuration. Range: 0 percent to 100 percent. (0 percent is -66 dBM and 100 percent is -3 dBM.) Default: 84 percent (-10dBM) See also: Recording Tone Recording Tone Duration Indicates the length of time in milliseconds for which the beep tone plays. If the value you configure here is less than one third the interval, then this value overrides the default provided by the Network Locale. From Cisco Unified Communications Manager Administration, choose Device > Phone > Phone Configuration. Range: 0 to 3000 Wideband Handset Note For some Network Locales that use a complex cadence, this setting applies only to the first beep tone. See also: Recording Tone Indicates whether wideband is enabled or disabled for the handset. Default: "Use Phone Default" on Cisco Unified Communications Manager Administration. (This default means that the phone will be enabled for a wideband handset only if the phone was shipped with a wideband handset.) • If Wideband Handset UI Control is enabled, you or the user can choose > User Preferences > Audio Preferences > Wideband Handset. • If Wideband Handset UI Control is disabled, use Cisco Unified Communications Manager Administration and choose Device > Phone > Phone Configuration to set this value. Note If you allowed this option to be user controllable (in the Wideband Handset UI Control option), the user-configured value takes precedence. 4-28 Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP) OL-21011-01