Cisco CP-7961G Administration Guide - Page 127
Device > Phone >, Phone Configuration, Apply Config, Option, Cisco Unified
View all Cisco CP-7961G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
Chapter 5 Configuring Features, Templates, Services, and Users Telephony Features Available for the Cisco Unified IP Phone Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued) Feature Description Configuration Reference Do Not Disturb (DND) When DND is turned on, either no audible rings occur during the ringing-in state of a call, or no audible or visual notifications of any type occur. For more information, refer to Cisco Unified Communications Manager Features and Services Guide, Do Not Disturb. You can configure the phone to have a softkey template with a DND softkey or a phone-button template with DND as one of the selected features. The following DND-related parameters are configurable in Cisco Unified Communications Manager Administration: • Do Not Disturb-This check box allows you to enable DND on a per-phone basis. From Cisco Unified Communications Manager Administration, choose Device > Phone > Phone Configuration. • DND Option-Choose "Call Reject" (to turn off all audible and visual notifications), or "Ringer Off" (to turn off only the ringer). DND Option appears on both the Common Phone Profile window and the Phone Configuration window (Phone Configuration window value takes precedence). • DND Incoming Call Alert-Choose the type of alert to play, if any, on a phone for incoming calls when DND is active. This parameter is located on both the Common Phone Profile page and the Phone configuration page (Phone Configuration window value takes precedence). • BLF Status Depicts DND-Enables DND status to override busy/idle state. Enbloc Dialing (SCCP phones only) Enbloc dialing enables SCCP to send all digits of a phone number simultaneously. This feature must be disabled if either Forced Authorization Codes (FAC) or Client Matter Codes (CMC) dialing is being used. To disable enbloc dialing, in Cisco Unified Communications Manager Administration, go to Device > Phone. On the Phone Configuration window, in the "Product Specific Configuration Layout" area, uncheck the "Enbloc Dialing" check box, then click Apply Config, then click Save. Fast Dial Service Allows a user to enter a Fast Dial code to place a call. Fast Dial codes can be assigned to phone numbers or Personal Address Book entries. (See "Services" in this table.) For more information, refer to: • Cisco Unified Communications Manager Administration Guide, Cisco Unified IP Phone Services Configuration. • Cisco Unified Communications Manager System Guide, Cisco Unified IP Phone Services. OL-21011-01 Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP) 5-9