Cisco CP-7961G Administration Guide - Page 174

Configuring the Cisco Unified IP Phone to use HTTP/HTTPS Protocols Chapter 8 Monitoring the Cisco Unified IP Phone Remotely Configuring the Cisco Unified IP Phone to use HTTP/HTTPS Protocols The Cisco Unified IP Phone can be configured to use: • The HTTPS protocol only • The HTTP or HTTPS protocols If your Cisco Unified IP Phone is configured to use the HTTP or HTTPS protocols (the second case above), use http://IP_address or https://IP_address for the phone's web access. Device Information The Device Information area on a phone's web page displays device settings and related information for the phone. Table 8-1 describes these items. To display the Device Information area, access the web page for the phone as described in the Accessing the Web Page for a Phone, page 8-2, and then click the Device Information hyperlink. Table 8-1 Device Information Area Items Item MAC Address Host Name Phone DN App Load ID Boot Load ID Version Expansion Module 1 Expansion Module 2 Hardware Revision Serial Number Model Number Message Waiting UDI Description Media Access Control (MAC) address of the phone Unique, fixed name that is automatically assigned to the phone based on its MAC address Directory number assigned to the phone Identifier of the firmware running on the phone Identifier of the factory-installed load running on the phone Version of the firmware running on the phone Phone load ID for the first Cisco Unified IP Phone Expansion Module 7914, if connected to the phone Phone load ID for the second Cisco Unified IP Phone Expansion Module 7914, if connected to the phone Revision value of the phone hardware Serial number of the phone Model number of the phone Indicates if there is a voice message waiting on any line for this phone Displays the following Cisco Unique Device Identifier (UDI) information about the phone: • Device Type-Indicates hardware type. For example, phone displays for all phone models • Device Description-Displays the name of the phone associated with the indicated model type • Product Identifier-Specifies the phone model • Version Identifier-Represents the hardware version of the phone The Version Identifier field might display a blank screen if the user is using an older model Cisco Unified IP Phone, because the hardware does not provide this information. • Serial Number-Displays the phone's unique serial number Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP) 8-4 OL-21011-01