Cisco CP-7961G Administration Guide - Page 161
Network Statistics Screen, Settings, Status., Status > Network Statistics., Clear
View all Cisco CP-7961G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 161 highlights
Chapter 7 Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone Status Menu Network Statistics Screen The Network Statistics screen displays information about the phone and network performance. Table 7-3 describes the information that appears in this screen. To display the Network Statistics screen, follow these steps: Procedure Step 1 Step 2 Step 3 Press the Settings button. Select Status. Select Status > Network Statistics. To reset the Rx Frames, Tx Frames, and Rx Broadcasts statistics to 0, press the Clear softkey. To exit the Network Statistics screen, press the Exit softkey. Table 7-3 Network Statistics Message Information Item Rx Frames Tx Frames Rx Broadcasts One of the following values: Initialized TCP-timeout CM-closed-TCP TCP-Bad-ACK CM-reset-TCP CM-aborted-TCP CM-NAKed KeepaliveTO Failback Phone-Keypad Phone-Re-IP Reset-Reset Reset-Restart Phone-Reg-Rej Load Rejected HC CM-ICMP-Unreach Phone-Abort Elapsed Time Port 1 Port 2 Description Number of packets received by the phone Number of packets sent by the phone Number of broadcast packets received by the phone Cause of the last reset of the phone Amount of time that has elapsed since the phone last rebooted Link state and connection of the PC port (for example, Auto 100 Mb Full-Duplex means that the PC port is in a link-up state and has auto-negotiated a full-duplex, 100-Mbps connection) Link state and connection of the Network port OL-21011-01 Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP) 7-9