Cisco CP-7961G Administration Guide - Page 68
Parts Used in Wall Mounting the Cisco Unified IP Phone, Caution, Step 1
View all Cisco CP-7961G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Adjusting the Placement of the Cisco Unified IP Phone Chapter 3 Setting Up the Cisco Unified IP Phone Caution Use care not to damage wires or pipes located inside the wall when securing screws to wall studs. Procedure Step 1 Step 2 Step 3 Step 4 Push in the footstand adjustment button. Adjust the footstand, so it is flat against the back of the phone. Insert two screws into a wall stud, matching them to the two screw holes on the back of the footstand. The keyholes fit standard phone jack mounts. Hang the phone on the wall. Figure 3-4 Parts Used in Wall Mounting the Cisco Unified IP Phone 137542 AUX 1 Footstand adjustment button-Raises and lowers adjustment plate 2 Wall mounting screw holes 3 Adjustment plate-Raises and lowers phone vertically 3-12 Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP) OL-21011-01