Cisco CP-7962G Administration Guide - Page 130

Telephony Features Available for the Cisco Unified IP Phone Chapter 5 Configuring Features, Templates, Services, and Users Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued) Feature Intercom Join/Select Join Across Lines/Select Line select Line select for voice messages Description Configuration Reference Allows users to place and receive intercom calls using programmable phone buttons. You can configure intercom line buttons to: Cisco Unified Communications Manager Feature and Services Guide, Intercom. • Directly dial a specific intercom extension. • Initiate an intercom call and then prompt the user to enter a valid intercom number. Note If your user logs into the same phone on a daily basis using their Cisco Extension Mobility profile, assign the phone button template that contains intercom information to their profile, and assign the phone as the default intercom device for the intercom line. Allows user to join two or more calls that are on For more information: one line to create a conference call and remain on • See Configuring Softkey Templates, the call. page 5-24. • Refer to Cisco Unified Communications Manager System Guide, Cisco Unified IP Phones. Allows users to apply the Join feature to calls that For more information: are on multiple phone lines. • See the Configuring Softkey Templates, page 5-24. • Refer to Cisco Unified Communications Manager System Guide, Cisco Unified IP Phones. If this feature is disabled (default), then the For more information, refer to the option ringing line is selected. When enabled, the primary "Always use prime line" in the following line is picked up even if a call is ringing on another chapters of Cisco Unified Communications line. The User must manually select the other line. Manager Administration Guide: Note This feature can also be enabled or disabled for Extension Mobility. • Device Profile Configuration • Common Phone Profile Configuration • Cisco Unified IP Phone Configuration When disabled (default), pressing the Messages button selects the line that has a voice message. If more than one line has voice mail, then the first available line is selected. When enabled, the primary line is always used to retrieve voice messages. Note This feature can also be enabled or disabled for Extension Mobility. For more information, refer to the option "Always use prime line for voice message" in the following chapters of Cisco Unified Communications Manager Administration Guide: • Device Profile Configuration • Common Phone Profile Configuration • Cisco Unified IP Phone Configuration 5-12 Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP) OL-21011-01