Cisco CP-7962G Administration Guide - Page 78
Option, Description, To Change, Manually set the IPv4 Address, Subnet Mask, Default
View all Cisco CP-7962G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Network Configuration Menu Chapter 4 Configuring Settings on the Cisco Unified IP Phone For information about the keys you can use to edit options, see Editing Values, page 4-3. Table 4-2 Network Configuration Menu Options Option IPv4 Configuration IPv6 Configuration MAC Address Host Name Description To Change Internet Protocol v4 address menu. In the IPv4 Configuration menu, you can do the following: • Enable or disable the phone to use the IPv4 address that is assigned by the DHCPv4 server. 1. Unlock network configuration options. 2. Scroll to IPv4 Configuration and press the Select softkey. • Manually set the IPv4 Address, Subnet Mask, Default Routers, DNSv4 Server, and Alternate TFTP servers for IPv4. For more information on the IPv4 address fields, refer to the specific field within this table. Internet Protocol v6 address menu. 1. Unlock network configuration In the IPv6 Configuration menu, you can do the following: options. • Enable or disable the phone to use the IPv6 address 2. Scroll to IPv6 Configuration and that is assigned by the DHCPv6 server or to use the press the Select softkey. IPv6 address that it acquires through Stateless Address Autoconfiguration (SLAAC). • Manually set the IPv6 Address, Subnet Prefix Length, DNSv6 Server, and IPv6 TFTP Servers. For more information on the IPv6 address fields, refer to Table 4-4. For more information on SLAAC, refer to Deploying IPv6 in Unified Communications Networks with Cisco Unified Communications Manager 7.1. Unique Media Access Control (MAC) address of the phone. Display only-Cannot configure. Unique host name that the DHCP server assigned to the Display only-Cannot configure. phone. Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP) 4-6 OL-21011-01