Cisco WS-C3560V2-24TS-E Command Reference - Page 136
dot1x timeout
View all Cisco WS-C3560V2-24TS-E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
dot1x timeout Chapter 2 Catalyst 3560 Switch Cisco IOS Commands dot1x timeout Use the dot1x timeout interface configuration command to set IEEE 802.1x timers. Use the no form of this command to return to the default setting. dot1x timeout {quiet-period seconds | reauth-period {seconds | server} | server-timeout seconds | supp-timeout seconds | tx-period seconds} no dot1x timeout {quiet-period | reauth-period | server-timeout | supp-timeout | tx-period} Syntax Description quiet-period seconds Number of seconds that the switch remains in the quiet state following a failed authentication exchange with the client. The range is 1 to 65535. reauth-period {seconds | Set the number of seconds between re-authentication attempts. server} The keywords have these meanings: • seconds-Sets the number of seconds from 1 to 65535; the default is 3600 seconds. server-timeout seconds • server-Sets the number of seconds as the value of the Session-Timeout RADIUS attribute (Attribute[27]). Number of seconds that the switch waits for the retransmission of packets by the switch to the authentication server. The range is 30 to 65535. supp-timeout seconds Number of seconds that the switch waits for the retransmission of packets by the switch to the IEEE 802.1x client. The range is 30 to 65535. tx-period seconds Number of seconds that the switch waits for a response to an EAP-request/identity frame from the client before retransmitting the request. The range is 5 to 65535. Defaults These are the default settings: reauth-period is 3600 seconds. quiet-period is 60 seconds. tx-period is 5 seconds. supp-timeout is 30 seconds. server-timeout is 30 seconds. Command Modes Interface configuration Command History Release 12.1(19)EA1 12.2(20)SE 12.2(25)SEC Modification This command was introduced. The ranges for the server-timeout, supp-timeout, and tx-period keywords were changed. The range for tx-period keyword was changed, and the reauth-period server keywords were added. 2-104 Catalyst 3560 Switch Command Reference 78-16405-05