Cisco WS-C3560V2-24TS-E Command Reference - Page 289
show mls qos interface, queueing, mls qos input-queue
View all Cisco WS-C3560V2-24TS-E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 289 highlights
Chapter 2 Catalyst 3560 Switch Cisco IOS Commands mls qos srr-queue input bandwidth This example shows how to assign the ingress bandwidths for the queues. Queue 1 is the priority queue with 10 percent of the bandwidth allocated to it. The bandwidth ratio allocated to queues 1 and 2 is 4/(4+4). SRR services queue 1 (the priority queue) first for its configured 10 percent bandwidth. Then SRR equally shares the remaining 90 percent of the bandwidth between queues 1 and 2 by allocating 45 percent to each queue: Switch(config)# mls qos srr-queue input priority-queue 1 bandwidth 10 Switch(config)# mls qos srr-queue input bandwidth 4 4 You can verify your settings by entering the show mls qos interface [interface-id] queueing or the show mls qos input-queue privileged EXEC command. Related Commands Command mls qos srr-queue input buffers mls qos srr-queue input cos-map mls qos srr-queue input dscp-map mls qos srr-queue input priority-queue mls qos srr-queue input threshold show mls qos input-queue show mls qos interface queueing Description Allocates the buffers between the ingress queues. Maps class of service (CoS) values to an ingress queue or maps CoS values to a queue and to a threshold ID. Maps Differentiated Services Code Point (DSCP) values to an ingress queue or maps DSCP values to a queue and to a threshold ID. Configures the ingress priority queue and guarantees bandwidth. Assigns weighted tail-drop (WTD) threshold percentages to an ingress queue. Displays ingress queue settings. Displays quality of service (QoS) information. 78-16405-05 Catalyst 3560 Switch Command Reference 2-257