Cisco WS-C3560V2-24TS-E Command Reference - Page 430
channel-group, channel-protocol, interface port-channel, Accesses or creates the port channel.
View all Cisco WS-C3560V2-24TS-E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 430 highlights
show etherchannel Chapter 2 Catalyst 3560 Switch Cisco IOS Commands This is an example of output from the show etherchannel 1 summary command: Switch> show etherchannel 1 summary Flags: D - down P - in port-channel I - stand-alone s - suspended H - Hot-standby (LACP only) R - Layer3 S - Layer2 u - unsuitable for bundling U - in use f - failed to allocate aggregator d - default port Number of channel-groups in use: 1 Number of aggregators: 1 Group Port-channel Protocol Ports 1 Po1(SU) LACP Gi0/1(P) Gi0/2(P) This is an example of output from the show etherchannel 1 port-channel command: Switch> show etherchannel 1 port-channel Port-channels in the group Port-channel: Po1 (Primary Aggregator) ------------ Age of the Port-channel = 01d:20h:24m:50s Logical slot/port = 10/1 Number of ports = 2 HotStandBy port = null Port state = Port-channel Ag-Inuse Protocol = LACP Ports in the Port-channel: Index Load Port EC state No of bits 0 00 Gi0/1 Active 0 0 00 Gi0/2 Active 0 Time since last port bundled: 01d:20h:24m:44s Gi0/2 This is an example of output from show etherchannel protocol command: Switch# show etherchannel protocol Channel-group listing Group: 1 ---------Protocol: LACP Group: 2 ---------Protocol: PAgP Related Commands Command channel-group channel-protocol interface port-channel Description Assigns an Ethernet port to an EtherChannel group. Restricts the protocol used on a port to manage channeling. Accesses or creates the port channel. 2-398 Catalyst 3560 Switch Command Reference 78-16405-05