Cisco WS-C3560V2-24TS-E Command Reference - Page 147
Examples, Related Commands, Flow Control Settings, Flow Control Resolution, Local Device
View all Cisco WS-C3560V2-24TS-E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
Chapter 2 Catalyst 3560 Switch Cisco IOS Commands flowcontrol Table 2-5 shows the flow control results on local and remote ports for a combination of settings. The table assumes that receive desired has the same results as using the receive on keywords. Table 2-5 Flow Control Settings and Local and Remote Port Flow Control Resolution Flow Control Settings Local Device send off/receive on send off/receive off Remote Device send on/receive on send on/receive off send desired/receive on send desired/receive off send off/receive on send off/receive off send on/receive on send on/receive off send desired/receive on send desired/receive off send off/receive on send off/receive off Flow Control Resolution Local Device Receives only Receives only Receives only Receives only Receives only Does not send or receive Does not send or receive Does not send or receive Does not send or receive Does not send or receive Does not send or receive Does not send or receive Remote Device Sends and receives Sends only Sends and receives Sends only Receives only Does not send or receive Does not send or receive Does not send or receive Does not send or receive Does not send or receive Does not send or receive Does not send or receive Examples This example shows how to configure the local port to not support flow control by the remote port: Switch(config)# interface gigabitethernet0/1 Switch(config-if)# flowcontrol receive off You can verify your settings by entering the show interfaces privileged EXEC command. Related Commands Command show interfaces Description Displays the interface settings on the switch, including input and output flow control. 78-16405-05 Catalyst 3560 Switch Command Reference 2-115