Cisco WS-C3560V2-24TS-E Command Reference - Page 39
archive download-sw
View all Cisco WS-C3560V2-24TS-E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Chapter 2 Catalyst 3560 Switch Cisco IOS Commands archive download-sw archive download-sw Use the archive download-sw privileged EXEC command to download a new image from a TFTP server to the switch and to overwrite or keep the existing image. archive download-sw {/force-reload | /imageonly | /leave-old-sw | /no-set-boot | /overwrite | /reload | /safe} source-url Syntax Description /force-reload /imageonly /leave-old-sw /no-set-boot /overwrite /reload /safe source-url Unconditionally force a system reload after successfully downloading the software image. Download only the software image but not the HTML files associated with the embedded device manager. The HTML files for the existing version are deleted only if the existing version is being overwritten or removed. Keep the old software version after a successful download. Do not alter the setting of the BOOT environment variable to point to the new software image after it is successfully downloaded. Overwrite the software image in flash memory with the downloaded one. Reload the system after successfully downloading the image unless the configuration has been changed and not been saved. Keep the current software image; do not delete it to make room for the new software image before the new image is downloaded. The current image is deleted after the download. The source URL alias for a local or network file system. These options are supported: • The syntax for the local flash file system: flash: • The syntax for the FTP: ftp:[[//username[:password]@location]/directory]/image-name.tar • The syntax for an HTTP server: http://[[username:password]@]{hostname | host-ip}[/directory]/image-name.tar • The syntax for a secure HTTP server: https://[[username:password]@]{hostname | host-ip}[/directory]/image-name.tar • The syntax for the Remote Copy Protocol (RCP): rcp:[[//username@location]/directory]/image-name.tar • The syntax for the TFTP: tftp:[[//location]/directory]/image-name.tar The image-name.tar is the software image to download and install on the switch. 78-16405-05 Catalyst 3560 Switch Command Reference 2-7