Cisco WS-C3560V2-24TS-E Command Reference - Page 370
set, set dscp 10
View all Cisco WS-C3560V2-24TS-E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 370 highlights
Chapter 2 Catalyst 3560 Switch Cisco IOS Commands set set Use the set policy-map class configuration command to classify IP traffic by setting a Differentiated Services Code Point (DSCP) or an IP-precedence value in the packet. Use the no form of this command to remove traffic classification. set {dscp new-dscp | [ip] precedence new-precedence} no set {dscp new-dscp | [ip] precedence new-precedence} Syntax Description dscp new-dscp New DSCP value assigned to the classified traffic. The range is 0 to 63. You also can enter a mnemonic name for a commonly used value. [ip] precedence new-precedence New IP-precedence value assigned to the classified traffic. The range is 0 to 7. You also can enter a mnemonic name for a commonly used value. Defaults No traffic classification is defined. Command Modes Policy-map class configuration Command History Release 12.1(19)EA1 12.2(25)SE 12.2(25)SEC Modification This command was introduced. The ip dscp new-dscp keyword was changed to dscp new-dscp. The set dscp new-dscp command replaces the set ip dscp new-dscp command. The ip keyword is optional. Usage Guidelines In Cisco IOS Release 12.2(25)SE or later, if you have used the set ip dscp command, the switch changes this command to set dscp in the switch configuration. If you enter the set ip dscp command, this setting appears as set dscp in the switch configuration. In Cisco IOS Release 12.2(25)SEC or later, you can use the set ip precedence or the set precedence command. This setting appears as set ip precedence in the switch configuration. The set command is mutually exclusive with the trust policy-map class configuration command within the same policy map. For the set dscp new-dscp or the set ip precedence new-precedence command, you can enter a mnemonic name for a commonly used value. For example, you can enter the set dscp af11 command, which is the same as entering the set dscp 10 command. You can enter the set ip precedence critical command, which is the same as entering the set ip precedence 5 command. For a list of supported mnemonics, enter the set dscp ? or the set ip precedence ? command to see the command-line help strings. 2-338 Catalyst 3560 Switch Command Reference 78-16405-05