Cisco WS-C3560V2-24TS-E Command Reference - Page 862
show platform frontend-controller
View all Cisco WS-C3560V2-24TS-E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 862 highlights
show platform frontend-controller Appendix C Catalyst 3560 Switch Show Platform Commands show platform frontend-controller Use the show platform frontend-controller privileged EXEC command to display counter and status information for the front-end controller manager and subordinate applications and to display the hardware and software information for the front-end controller. show platform frontend-controller {buffer | generic | manager number | subordinate number | version number} [ | {begin | exclude | include} expression] This command is supported only on Catalyst 3560G-48TS, 3560G-48PS, 3560G-24TS, and 3560G-24PS switches. Syntax Description buffer generic manager number subordinate number version number | begin | exclude | include expression Display the last 1024 bytes sent from the manager to the subordinate and the reverse. Display the generic counters that do not specifically apply to the manager or subordinate. Display the counters for the manager and the subordinate specified by number. See the "Usage Guidelines" section for the number range. Display the subordinate status and the counters for the subordinate specified by number. See the "Usage Guidelines" section for the number range. Display the hardware and software version information for the subordinate status specified by number. See the "Usage Guidelines" section for the number range. (Optional) Display begins with the line that matches the expression. (Optional) Display excludes lines that match the expression. (Optional) Display includes lines that match the specified expression. Expression in the output to use as a reference point. Command Modes Privileged EXEC Command History Release 12.2(20)SE3 Modification This command was introduced. Usage Guidelines On the Catalyst 3560G-48TS and 3560G-48PS switches, the subordinate number range is 0 to 2. On the Catalyst 3560G-24TS and 3560G-24PS switches, the subordinate number range is 0 to 1. You should use this command only when you are working directly with a technical support representative while troubleshooting a problem. Do not use this command unless a technical support representative asks you to do so. Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear. Catalyst 3560 Switch Command Reference C-8 78-16405-05