Cisco WS-C3560V2-24TS-E Command Reference - Page 452
show ip dhcp snooping database, detail, begin | exclude, include, begin
View all Cisco WS-C3560V2-24TS-E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 452 highlights
show ip dhcp snooping database Chapter 2 Catalyst 3560 Switch Cisco IOS Commands show ip dhcp snooping database Use the show ip dhcp snooping database user EXEC command to display the status of the DHCP snooping binding database agent. show ip dhcp snooping database [detail] [ | {begin | exclude | include} expression] This command is available only if your switch is running the IP services image, formerly known as the enhanced multilayer image (EMI). Syntax Description detail | begin | exclude | include expression (Optional) Display detailed status and statistics information. (Optional) Display begins with the line that matches the expression. (Optional) Display excludes lines that match the expression. (Optional) Display includes lines that match the specified expression. Expression in the output to use as a reference point. Command Modes User EXEC Command History Release 12.2(20)SE Modification This command was introduced. Examples This is an example of output from the show ip dhcp snooping database command: Switch> show ip dhcp snooping database Agent URL : Write delay Timer : 300 seconds Abort Timer : 300 seconds Agent Running : No Delay Timer Expiry : Not Running Abort Timer Expiry : Not Running Last Succeded Time : None Last Failed Time : None Last Failed Reason : No failure recorded. Total Attempts : 0 Startup Failures : 0 Successful Transfers : 0 Failed Transfers : 0 Successful Reads : 0 Failed Reads : 0 Successful Writes : 0 Failed Writes : 0 Media Failures : 0 2-420 Catalyst 3560 Switch Command Reference 78-16405-05