Cisco WS-C3560V2-24TS-E Command Reference - Page 715
abort, apply, reset, show changes, show current, show proposed
View all Cisco WS-C3560V2-24TS-E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 715 highlights
Chapter 2 Catalyst 3560 Switch Cisco IOS Commands vlan database Examples When you have modified VLAN or VTP parameters, you can use these editing buffer manipulation commands: • abort: exits the mode without applying the changes. The VLAN configuration that was running before you entered VLAN configuration mode continues to be used. • apply: applies current changes to the VLAN database, increments the database configuration revision number, propagates it throughout the administrative domain, and remains in VLAN configuration mode. Note You cannot use this command when the switch is in VTP client mode. • exit: applies all configuration changes to the VLAN database, increments the database configuration number, propagates it throughout the administrative domain, and returns to privileged EXEC mode. • no: negates a command or set its defaults; valid values are vlan and vtp. • reset: abandons proposed changes to the VLAN database, resets the proposed database to the implemented VLAN database on the switch, and remains in VLAN configuration mode. • show: displays VLAN database information. • show changes [vlan-id]: displays the differences between the VLAN database on the switch and the proposed VLAN database for all normal-range VLAN IDs (1 to 1005) or the specified VLAN ID (1 to 1005). • show current [vlan-id]: displays the VLAN database on the switch or on a selected VLAN (1 to 1005). • show proposed [vlan-id]: displays the proposed VLAN database or a selected VLAN (1 to 1005) from the proposed database. The proposed VLAN database is not the running configuration until you use the exit or apply VLAN configuration command. You can verify that VLAN database changes have been made or aborted by using the show vlan privileged EXEC command. This output is different from the show VLAN database configuration command output. This example shows how to enter the VLAN configuration mode from the privileged EXEC mode and to display VLAN database information: Switch# vlan database Switch(vlan)# show VLAN ISL Id: 1 Name: default Media Type: Ethernet VLAN 802.10 Id: 100001 State: Operational MTU: 1500 Translational Bridged VLAN: 1002 Translational Bridged VLAN: 1003 VLAN ISL Id: 2 Name: VLAN0002 Media Type: Ethernet VLAN 802.10 Id: 100002 State: Operational MTU: 1500 78-16405-05 Catalyst 3560 Switch Command Reference 2-683