Cisco WS-C3560V2-24TS-E Command Reference - Page 516
show mls qos interface, buffers, queueing, Catalyst 3560 Switch Command Reference,
View all Cisco WS-C3560V2-24TS-E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 516 highlights
show mls qos interface Chapter 2 Catalyst 3560 Switch Cisco IOS Commands Examples This is an example of output from the show mls qos interface interface-id command when VLAN-based QoS is enabled: Switch> show mls qos interface gigabitethernet0/1 GigabitEthernet0/1 trust state:not trusted trust mode:not trusted trust enabled flag:ena COS override:dis default COS:0 DSCP Mutation Map:Default DSCP Mutation Map Trust device:none qos mode:vlan-based This is an example of output from the show mls qos interface interface-id command when VLAN-based QoS is disabled: Switch> show mls qos interface gigabitethernet0/2 GigabitEthernet0/2 trust state:not trusted trust mode:not trusted trust enabled flag:ena COS override:dis default COS:0 DSCP Mutation Map:Default DSCP Mutation Map Trust device:none qos mode:port-based This is an example of output from the show mls qos interface interface-id buffers command: Switch> show mls qos interface gigabitethernet0/2 buffers GigabitEthernet0/2 The port is mapped to qset : 1 The allocations between the queues are : 25 25 25 25 This is an example of output from the show mls qos interface interface-id queueing command. The egress expedite queue overrides the configured shaped round robin (SRR) weights. Switch> show mls qos interface gigabitethernet0/2 queueing GigabitEthernet0/2 Egress Priority Queue :enabled Shaped queue weights (absolute) : 25 0 0 0 Shared queue weights : 25 25 25 25 The port bandwidth is limited to: 100% The port is mapped to qset : 1 2-484 Catalyst 3560 Switch Command Reference 78-16405-05