Cisco WVC210 Administration Guide - Page 79

Troubleshooting Questions and Answers A Q. The video image is blurry. Try cleaning the dome, or adjusting the MPEG-4 or MJPEG image quality setting found in Audio/Video > Video Settings, page 45. Q. How do I set up UPnP so my cameras broadcast their availability to my network? UPnP networking technology provides automatic IP configuration and dynamic discovery of devices added to a network. Services and capabilities offered by networked devices, such as printing and file sharing, are available among each other without a lot of network configuration. UPnP Is automatically enabled on the cameras. In a Windows environment, it may or may not be enabled. On Windows XP, you must log on to the computer as a system administrator to install the UPnP components. If using Windows Vista, UPnP Is enabled by default. However, if it is not enabled, turn off UAC (User Access Control) before following this procedure. Follow these steps to enable UPnP user interface on your computer: STEP 1 Go to Start, click Control Panel, and then click Add or Remove Programs. STEP 2 In the Add or Remove Programs dialog box, click Add/Remove Windows Components. NOTE If the default ports are already used by another device connecting to the same router, the camera will select another port. STEP 3 In the Windows Components Wizard dialog box, make sure Networking Services is checked. STEP 4 Highlight Networking Services, and then click Details. STEP 5 In the Networking Services dialog box, select Universal Plug and Play and then click OK. STEP 6 Click Next in the following window. STEP 7 Click Finish. UPnP is enabled. WVC210 Wireless-G PTZ Internet Video Camera With 2-Way Audio Administration Guide 73