Compaq 435 Maintenance and Service Guide - Page 59
Optical drive (select models only), Remove the Phillips PM2.5×6.0 screw
View all Compaq 435 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Optical drive (select models only) NOTE: The optical drive spare part kit includes a bezel and bracket. Description Blu-ray Disc ROM with SuperMulti DVD±R/RW Double-Layer Drive with LightScribe DVD±RW and CD-RW Super Multi Double-Layer Combo Drive with LightScribe Spare part number 645989-001 645988-001 Before removing the optical drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 43). 5. Remove the memory module/wireless module compartment cover (see WLAN module on page 44). 6. Remove the hard drive compartment cover (see Hard drive on page 48). Remove the optical drive: 1. Remove the Phillips PM2.5×6.0 screw (1) that secures the optical drive to the computer. 2. Insert an unbent paper clip or similar thin tool into the optical drive tab access (2) to release the optical drive tray from the optical drive. 3. Remove the optical drive (3) by sliding it out of the optical drive bay. Component replacement procedures 51