Compaq 435 Maintenance and Service Guide - Page 64
Top cover, the defective top cover and installed on the replacement top cover
View all Compaq 435 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Top cover NOTE: The top cover spare part kit includes the TouchPad and TouchPad cable. Description In pewter finish for use with all computer models In charcoal gray finish for use only with Compaq 435 and Compaq 436 computer models Spare part number 646667-001 645963-001 Before removing the top cover, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 43), and then remove the following components: ● Memory module/wireless module compartment cover (see WLAN module on page 44) ● Hard drive (see Hard drive on page 48) ● Keyboard (see Keyboard on page 53) NOTE: When replacing the top cover, be sure that the following components are removed from the defective top cover and installed on the replacement top cover: ● Power button board and cable (see Power button board on page 60) ● TouchPad button board and cable (see TouchPad button board on page 61) Remove the top cover: 1. Close the computer. 2. Turn the computer upside down, with the front toward you. 56 Chapter 4 Removal and replacement procedures