Compaq 435 Maintenance and Service Guide - Page 98
Speakers see, USB board see
View all Compaq 435 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Description Intel Celeron DC T3300 2.00-GHz processor (1.0-MB L2 cache, 800-MHz FSB) Intel Celeron SC B950 2.10-GHz processor (1.0-MB L2 cache, 800-MHz FSB) Intel Celeron SC B940 2.00-GHz processor (1.0-MB L2 cache, 800-MHz FSB) Intel Celeron SC C925 2.30-GHz processor (1.0-MB L2 cache, 800-MHz FSB) Intel Celeron SC C900 2.20-GHz processor (1.0-MB L2 cache, 800-MHz FSB) Intel Celeron SC B810 1.60-GHz processor (1.0-MB L2 cache, 800-MHz FSB) Spare part number 592399-001 653338-001 653337-001 636636-001 534419-001 646760-001 Before removing the processor, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 43), and then remove the following components: ● WLAN module (see WLAN module on page 44) ● Keyboard (see Keyboard on page 53) ● Top cover (see Top cover on page 56) ● Speakers (see Speakers on page 63) ● USB board (see USB board on page 65) ● Power connector cable (see Power connector cable on page 66) ● Display assembly (see Display assembly on page 68) ● System board (see System board on page 76) ● Fan/heat sink assembly (see Fan/heat sink assembly on page 83) Remove the processor: 1. Use a flat-bladed screw driver to turn the processor locking screw one-half turn counterclockwise (1), until you hear a click. 90 Chapter 4 Removal and replacement procedures