Compaq 435 Maintenance and Service Guide - Page 71
Speakers, Release the speaker cables
View all Compaq 435 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Speakers Description Speaker Kit (includes left and right speakers and cable) Spare part number 645978-001 Before removing the speakers, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 43), and then remove the following components: ● Memory module/wireless module compartment cover (see WLAN module on page 44) ● Hard drive (see Hard drive on page 48) ● Keyboard (see Keyboard on page 53) ● Top cover (see Top cover on page 56) Remove the speakers: 1. Disconnect the speaker cable (1) from the system board. 2. Release the speaker cables (2) from the clips built into the base enclosure. 3. Release the ZIF connector to which the USB board cable is attached, and then disconnect the USB cable (3) from the system board. 4. Remove the two Phillips PM2.5×6.0 screws (4) and the Phillips PM2.0×9.0 screw (5) that secure the speakers to the computer. Component replacement procedures 63