Compaq 435 Maintenance and Service Guide - Page 70
Remove the TouchPad button board and cable, that secure the TouchPad button board
View all Compaq 435 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Remove the TouchPad button board and cable: 1. Turn the top cover upside down, with the top toward you. 2. Release the TouchPad board cable (1) and the TouchPad button board cable (2) from the top cover. (The TouchPad board cable and the TouchPad button board cable are attached to the top cover with double-sided tape.) 3. Remove the four Phillips PM2.0×4.0 screws (3) that secure the TouchPad button board to the top cover. 4. Remove the TouchPad button board (4). Reverse this procedure to install the TouchPad button board and cable. 62 Chapter 4 Removal and replacement procedures
Remove the TouchPad button board and cable:
1.
Turn the top cover upside down, with the top toward you.
2.
Release the TouchPad board cable
(1)
and the TouchPad button board cable
(2)
from
the top cover. (The TouchPad board cable and the TouchPad button board cable are attached to
the top cover with double-sided tape.)
3.
Remove the four Phillips PM2.0×4.0 screws
(3)
that secure the TouchPad button board to
the top cover.
4.
Remove the TouchPad button board
(4)
.
Reverse this procedure to install the TouchPad button board and cable.
62
Chapter 4
Removal and replacement procedures