Compaq 435 Maintenance and Service Guide - Page 67
Reverse this procedure to install the top cover
View all Compaq 435 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
8. Remove the three Phillips PM2.5×6.0 screws that secure the top cover to the computer. 9. Lift the rear edge of the top cover (1) until the left and right sides disengage from the base enclosure. 10. Remove the top cover (2). Reverse this procedure to install the top cover. Component replacement procedures 59
8.
Remove the three Phillips PM2.5×6.0 screws that secure the top cover to the computer.
9.
Lift the rear edge of the top cover
(1)
until the left and right sides disengage from
the base enclosure.
10.
Remove the top cover
(2)
.
Reverse this procedure to install the top cover.
Component replacement procedures
59