Compaq 435 Maintenance and Service Guide - Page 76
Display assembly
View all Compaq 435 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
10. Remove the power connector (4). Reverse this procedure to install the power connector cable. Display assembly Description Spare part number 14.0-in, HD, LED, display assembly (includes microphone and wireless antenna transceivers and cables) For use with all computer models: AntiGlare in pewter finish 646666-001 BrightView in pewter finish 646664-001 For use only with Compaq 435 and Compaq 436 computer models: AntiGlare in charcoal gray finish 647607-001 BrightView in charcoal gray finish 645984-001 Before removing the display assembly, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 43). 68 Chapter 4 Removal and replacement procedures