Compaq Evo n160 Maintenance and Service Guide Compaq Evo N160 Series - Page 104
Removing the Hard Drive Bracket, Remove the hard drive bracket
View all Compaq Evo n160 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Removal and Replacement Procedures 2. Position the modem/NIC cable 1 so it rests in the empty modular media bay in the base enclosure (Figure 5-26). 3. Disconnect the speaker assembly cables 2 from the system board. 4. Remove the two silver M2 × 6.5 screws 3 that secure the hard drive bracket to the base enclosure. 5. Remove the hard drive bracket 4. Figure 5-26. Removing the Hard Drive Bracket Maintenance and Service Guide 5-37
Removal and Replacement Procedures
Maintenance and Service Guide
5
–
37
2.
Position the modem/NIC cable
1
so it rests in the empty
modular
media bay in the base enclosure (Figure 5-26).
3.
Disconnect the speaker assembly cables
2
from the system
board.
4.
Remove the two silver M2
×
6.5 screws
3
that secure the
hard drive bracket to the base enclosure.
5.
Remove the hard drive bracket
4
.
Figure 5-26. Removing the Hard Drive Bracket